Application: Wet charcoal briquettes drying purpose, such as pillow/oblate/oval/egg shape BBQ briquettes,Cylinder/Hexagonal BBQ briquettes, hookah briquettes and so on.

Advantage:

This series dryer are special designed for the charcoal briquettes based on charcoal briquettes high moisture content and low light temperature, and strong moisture grasping ability. Taking full account of temperature/air flow/contact area on the drying process to improve the drying speed. Replacing the traditional Roast Idea to dry briquettes by the blow the briquettes with large hot air quantity with less temperature.

l  More Safety. Drying temperature (90-150 ^oC) is far less than the light temperature (400 ^oC), and control the different hot air quantity and temperature at different area of charcoal briquettes. There is pre-heating layer, drying layer, and warm keeping layer inside dryer to guarante the drying result;

l  High Efficiency. Scientific hot air duct and moisture route designing, even the air duct diameter and wind hole are precise designs to extend the heat use ratio.

l  Less Fuel and Power Consumption( saving 15%-25%). Compared with traditional roast solution, DMSMAC dryer have less hot air temperature request to short the fuel conspution; Optimized air duct designing, make full use the hot air and space inside dryer, keeping enough air flow inside dryer to guarantee dry conditions.

l  Less Briquettes Damage Ratio( less than 5%). Chain plate assembled on dryer, greatly short the drop height,and make full use of dryer space to short the paving thickness(<10cm) of the briquettes on the plate compare with mesh. Mesh belt type dryer damage ratio is 8%-10%, and vertical dryer damage ratio is 10%-15%.

l  Solid frame build by 200mm U-steel, reduce the effect by temperatur. And 10cm thickness rock wool insulation layer, reduce the heat lost. 48A standard chain and thickness 4mm plate reinforced by Dia16mm steel bar supply the solid support surface of briquettes.

Value of Dryer:

The dryer is working by 7/24, and no need workers to operate. Output of dried briquettes can be custom-made as client press machine request. Service life can be upto 5-8 years. Greatly suitable for the large-tonnage charcoal plant, especially on the busy season.

Notes:  The dryer length, width and layer can be custom-made as client workshop size request.

Please let me know following data for us to design the dryer for you:

1, what is your charcoal briquettes shape and size? (the size of briquettes are very important for the drying time, normall smaller size means less drying time, and total drying length will be short.)

2, how many tons dried charcoal you are planning to get per hour?( briquettes moisture content after drying is less than 8%)

3, what kinds of fuel is available for you?  Coal/wood pellet/LPG/CNG/Diesel/Petrol/ or other?( there is different burner for different fuel, and price will be greatly different also. )

Technical Data for 1000 kg per hour reference: 

Briquettes Size: 60mm; Moisture input: 30%-40%; Output Moisture: <8%; Bulk Density: 400-450kg/m³